Clock Mk1

[mikedoyle]

hi is there anybody out there that can put me straight on refitting my clock I took it out to replace the bulb a simple enough job but when i came to replace it there didnt seem to be anywhere to clip it into there is a piece on the rear of the clock the same shape as the rear of the clockbut it just slides up and down it dosent appear to be broken of anywhere but dosent seem to do anything either all i can see when i look in the hole is the roof linning so at the moment it just hanges there loosely looking all forlone any help would be good thanks in advance. mike

[big_kev]

you could look here

 

If you look at "sterp 2"....just to the left of Seatkid's beautifully manicured thumb you can see one of the little clips that holds the clock in place.

 

It should just click back in ?

Edited May 4, 2008 by big_kev

[mikedoyle]

you could look here

 

If you look at "sterp 2"....just to the left of Seatkid's beautifully manicured thumb you can see one of the little clips that holds the clock in place.

 

It should just click back in ?

cheers for that big k having seen seatkids pictures i now know where i went wrong there was two broken clips on the outer suround of the clock so the whole lot came out instead of just the clock we learn by our mistakes thanks for the help mike.