biggallute Posted April 23, 2008 Report Posted April 23, 2008 HI all got a tomtom permanent fitting kit & a parrot loom with proper iso to ford quadlock cable which I intend to fit into my 2008 galaxy ghia which is fitted with the sony gen2 head unit,I have the set of four radio removal keys but can't find any slots to fit them in so does it mean I somehow have to remove a "faceplate" to get at these?Don't wannt to start ripping things apart without being nescessary Quote
Smilge Posted April 24, 2008 Report Posted April 24, 2008 Anything like this? ........... Try this site if you don't find them. http://www.siocommunications.co.uk/Forum/i....php?board=49.0 Quote
biggallute Posted April 25, 2008 Author Report Posted April 25, 2008 no m8 it's the one shown on page five here sony cd player Quote
searcher Posted April 25, 2008 Report Posted April 25, 2008 Anything like this? ........... Try this site if you don't find them. http://www.siocommunications.co.uk/Forum/i....php?board=49.0 Looks like the dashboard out of a Lada :unsure: Quote
Smilge Posted April 25, 2008 Report Posted April 25, 2008 Tusk Tusk Ady ........ must admit looks a bit tacky doesn't it. Still I have the slightly older Sony version to bigallutes but the key holes are quite visible. I dunno then bigallute ...... did you try contacting SIO as they might have done several already? Quote
tractorboy1964 Posted April 26, 2008 Report Posted April 26, 2008 You have to remove the fascia trim starting down by the handbrake, carefully prising it away. The "wood" trim on the dash must also be pulled off. You can then pull off the trim around the Sony. This shoud reveal 4 screws you can undo and the head unit will pull out. No special tools required. Bob. Quote
biggallute Posted May 11, 2008 Author Report Posted May 11, 2008 cheers Bob you were spot on! :rolleyes: If anyone contemplates doing this there is NO need to go removing bits from the glovebox or even the fuse board as I found that an ignition sense wire can be found in the thick loom of wires just slightly to the right of the cd player hole & is coloured PURPLE Quote
cmjennings21 Posted June 2, 2008 Report Posted June 2, 2008 cheers Bob you were spot on! ;) If anyone contemplates doing this there is NO need to go removing bits from the glovebox or even the fuse board as I found that an ignition sense wire can be found in the thick loom of wires just slightly to the right of the cd player hole & is coloured PURPLEDo you know what the loom was called that you used for the Parrot. I've just removed the Parrot from my Galaxy MkII and want to install to Galaxy MkIII with Sony GEn2 head unit? Chris Quote
Keith T Posted October 18, 2010 Report Posted October 18, 2010 Hi all, I've read the post above from tractorboy1964 regarding removing the Sony head unit but I'm a bit wary about breaking something. Does anyone know exactly how the trim and "wood" strip is fixed. Am I looking for clips or tabs? Has anybody got any pictures? Thanks Keith Quote
randall977 Posted October 18, 2010 Report Posted October 18, 2010 I posted this a few weeks ago for this exact problem - it tells you what you need to know... Removing a 2nd Gen Sony Quote
Keith T Posted November 4, 2010 Report Posted November 4, 2010 Thanks for that. It's just what I needed. Cheers Keith Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.