gregers Posted February 26, 2008 Report Posted February 26, 2008 1st of all i thought it was just 1 of them things that the rear drivers side brake bulb had to be changed 3 times in the last month,but today i noticed that the bulb illumination warning light came on every time i was stationary in traffic then after moving off a few yards later it would stop.have tried hunting on here for the solution,im thinking a wiring fault somewhere but where do i start looking?bloody annoying.any help on this would be great. regards gregers Quote
Biscuit Posted February 26, 2008 Report Posted February 26, 2008 (edited) Hi GregersIt could be your brake pad wear indicators.it will go off because the pressure has been released off the padscheck this first if you havent alreadyBiscuit Edited February 26, 2008 by Biscuit Quote
gregers Posted February 26, 2008 Author Report Posted February 26, 2008 aaahhhhhaaaaa thanx for that m8,but i thought they had there own symbol on the dash lights if my pads are getting thin? Quote
sanjsanj Posted February 26, 2008 Report Posted February 26, 2008 aaahhhhhaaaaa thanx for that m8,but i thought they had there own symbol on the dash lights if my pads are getting thin?thats what i thought! anyway, it could be the brake light switch... very common weak point. failure of mine caused both my brake lights to fuse as the same time :s Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.