Turns Over But Wont Start After Fuse Removal

[davetee]

I have removed some fuses from the fuse board and after replacing them I now find the car turns over but will not start also will not engage starter on first turn of key but requires a second turn of key to turn the engine over every thing else seems to work I can assume I removed a fuse that I should not have.

How do I get her to fire up 2001 zetec 115 bhp

Thanks for any advice

[Neils TDi again]

Any warnings illuminated that may indicate an SRS failure or Fuel reset required ?

 

Might be worth disconnecting the battery for about an hour then trying it again (make sure you have all your codes first).

[davetee]

No warnings that I am aware of the door LED is flashing very fast I put the ignition key in and turn it wont turn over if I then turn ignition off a go to start it turns over has anyone experianced this sort of problem after discoing the battery.

[gregers]

you havnt changed the battery's in your fob have you?sounds like you might have lost the chip from inside.

[davetee]

No key fob is fine not touched it still lights up!