Jump to content
Ford Galaxy Owners Club

Recommended Posts

Posted

any idear y my window dnt work, motor ok tested on pass side,power ok

its doing my head in :(

Posted

I fail to see what testing the passenger side window has to do with the drivers side... :(

 

How do you know the motors Ok on the drivers side? - does it make a noise? At least that'll eliminate the switch. Then....you have to strip the door panel down.... :D

Posted
I TOOK OF THE ASSEMBLY AND AS THE WIRING HARNESESS R THE SAME ON THE PASS SIDE AND CONNECTED IT UP AND TESTED IT FROM ALL SWITCHES
Posted
THEN ITS SOMAT MECHANICAL IN THE MOTOR GEARBOX OR THEM WIRE THINGYS THAT PULL THE GLASS UP AND DOWN.
Posted

I HAVE TAKEN THE MOTOR AND GEARING OF THE ACTUATOR AND IT RUNS FINE ON THE PASSANGER SIDE HARNESS BUT ONLY CLICKS ON THE DRIVERS SIDE.

JUST WONDERING IF THERE MIGHT B AN EARTH PROBLEM OR THE ECU

 

CHEERS SIE

Posted

IF U GOT A METER (why am I shouting?) Looking at the motor module connector...

 

the 0v earth is the brown wire

the 12v permanent supply is the red/yellow wire

the 12v from ignition switch is the black/yellow wire

 

Check voltages when u try to open window.

Posted

Then look at the wires between the a frame and door in rubber tube

sounds like a break in 1 or 2 wires

 

Ian

Posted

found problem to b main earth lead in door rubber. there was ov on the motor plug but it was dragging the earth through the motor not through its own source.

window motor now works,but the cables got a kink init so can anybody tell me were i can get a 2nd hand regulater

 

sie

Guest smithgt
Posted
I've have a very similar problem with my Front Drivers side electric windows. I just had to rewire the cable through the door hing and now the window is working okay.
Posted

Similar electric window problems to those above. My driver's side cannot be put down or up with the switch, but the passenger side can be put down but not up! The passenger switch does operate the passenger window OK! I took out the driver's side switch panel, and it looked fine.

I then used a piece of copper connecting wire across the switch black connector block and still the same response, so switch OK. How do I pull off the rubber tube in the door hinge to check the wires for continuity? Also, if I have to take the door trim panel off to check the window motor, how do I do that? Can't see any screws or clips to undo.

ThankZZZ

Guest smithgt
Posted

On the '98 Galaxy, the rubber cover in the door hinge just unscrews. I found that one of the cable had proken away from the plug.

 

As far as the door trim goes its just clipped on. If you start at the bottom, you should be able to see some small (yellow) clips - you maky break a couple, but spares are readily available.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...