Jump to content
Ford Galaxy Owners Club

Recommended Posts

Posted
Hi, following a 'minor' accident (which I wont go into) I need a replacement drivers door for my 2003 1.9 TDi. I've found one on ebay for
Posted
Just found out the door has no glass and no motor but is apparently in mint condition in the right colour. Any advise would be greatly appreciated. Thanks.
Posted

If it is the exact same as yours, and you can use your glass and regulator....then it should be ok,,,be careful though as the glass is bloomin heavy!..mind, its a front one so not as heavy as the rear ones.

 

I have no idea if it is a reasonable price, but i guess it wont hurt to ring fords tomoz just to see how much it would cost for a new un.

 

have you got a link for the ebay one please?

Posted
personally i think after reading all the questions put to him,he is rather expensive for a lot of the parts,ive seen a lot of parts cheaper on ebay.
Posted
wouldnt touch with a barge pole to be honest no matter how desperate.and a hundred smackers for the reg and motor is high as it costs not much more than that brand new.
Posted
Thanks for all the advice, I really appreciate it. Just out of interest, does anybody know if the door from a MkI would fit the MkII? Just gives me more options. Once again, many thanks.
Posted (edited)

Recent negative feedbacks, sky high prices - do what BigKev says and see what he comes back with and if he agrees then COD (Cash on delivery, no payment up-front)

 

With regards to the doors fitting from a Mark 1 to a Mark 2, i once heard that the doors were identical, only front-end and rear-end of the Galaxys were 'facelifted' but please do not take my word for it.

Edited by Saif Rehman
Posted
Just to give you all a laugh, I thought I'd explain why I need a new door (please bare in mind the wife normally drives the Galaxy and I drive an unleaded Focus - clue). I was taking the wife and kids to Blackpool for the weekend to see the lights and stopped at my local Tesco to fill up with diesel. Unfortunately I suffered some sort of brainstorm and put
Posted
IIRC these doors are individually welded on (well at least the hinges are) I dont think you can depend upon taking a door off the hinges and re-hanging a new one and expect to fit exactly - I dont know how much variation there is.
Posted
Hi, thanks, certainly worth baring in mind. Just had a quote from Ford for a replacement door, unpainted, obviously no glass etc
Posted
Thanks for that, that gives me a little more confidence if I can find a door at the right price. Many Thanks.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...