No Gears

[drcrawey]

I have broken down recently with a gearbox problem, got recovered by AA (eventually but thats another story) crawling along in first gear , dipped clutch tried to put in neutral and lifted clutch resulting in a stall. tried this again same result!..I have check all cables which seem to be ok but the shaft that enters the gearbox seems to have no resistance when turned. I suspect and hope this is the pinch bolt failed on the selector inside the box .Does anyone have any other ideas and is it possible to remove selector assembly without dropping gearbox?

thanks in advance Ian

[Neils TDi again]

A quick search should reveal this in detail many posts have been made, yes you can get the selector out without dropping the box but you have to have small hands and patience !

 

Have a search round and see what marvels the forum reveals.