Dieselalhambra Posted June 25, 2007 Report Posted June 25, 2007 ABS light is on all time. Drive shaft rings are turning ok. Tested front sensors, offside gives no reading on meter. Have not disturbed back sensors as i assume front due to steering lock normally break first. Is this sufficient to say its broken or do i need to have a diagnostic check. Also tried to remove it in case i have to change it, could not budge it, do you need to drill it out,or does the hub have to come off to drift it out. Is the sensor a main dealer part only ? Quote
seatkid Posted June 25, 2007 Report Posted June 25, 2007 Tested front sensors, offside gives no reading on meter. I would say you've found the problem...... Quote
Dieselalhambra Posted June 25, 2007 Author Report Posted June 25, 2007 Hope so but how do i remove it. Can anyone who has changed sensor advise how they did it. As is seems well stuck in place. Quote
Chris Young Posted June 25, 2007 Report Posted June 25, 2007 Got my rear sensor from Ford cost ex vat Quote
Dieselalhambra Posted June 26, 2007 Author Report Posted June 26, 2007 Thanks Chris for your advice on how you removed your sensor. I will attack mine on Sunday. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.