makil6 Posted June 2, 2007 Report Posted June 2, 2007 hi folks. hopefully sorted my oil leak today(new crankcase breather pipe(dealer only 25 quid) fitted today) but when i was trying to access the bolts for the pipe i removed the top radiator hose at the temp sensor end. and since putting it back on the light above the temp indicator needle on the dash flashes after about 15 secs of the ignition being switched on. engine doesnt have to be running it just comes on and stays on till the ign. switched off. i've ran the gal as normal with the light flashing and the temp indicator needle doesnt rise any more than it used to. but now the missuss thinks its unsafe and wont drive it, so the question is. have i done some damage when removing the pipe or is there a pressure problem or does this light need to be reset somehow?thanks. Mike Quote
Scorpiorefugee Posted June 8, 2007 Report Posted June 8, 2007 Can't be sure but it may be the water level sensor causing the light to come on. Mine did when I had a slow leak. You may have pulled a wire off or something. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.