Jump to content
Ford Galaxy Owners Club

Recommended Posts

Posted
The permanent live is usually a red and white wire. It maybe easier buying a Harness adaptor there only a couple of quid of flEBAY . You can run a wire to the battery but make sure it's the right gauge and fit an inline fuse
Posted

What stereo are you trying to fit, std or after market?

If its a standard jobbie, there must be a fault in wiring somewhere along the line. Test the connector with a multi meter to see if you can find a perminant live.

 

If its aftermarket stereo, most have bullit connectors on the power supply wires so that you can move them from switchable live to perminant live depending on car wiring. If not I`d chop the wires and add some connectors, it`ll be easier than routing a new cable :lol:

Posted (edited)

Assuming its a std ford unit you have.

 

Thats the same problem I had with an earlier gal, cost me

Edited by Dave-G
Posted

I had bother putting a JVC with atandard DIN connectors in my MK1

 

The DIN connector in the galaxy was wired differently and as a result I kept losing my memory (in the head unit) For some reason the permanent live was actually switched and the switched live was permanent?

 

All I did was cut and swapped the 2 lives on the galaxy wiring just behind the connector. If you use bullet conectors or similar you can simply swap them back at any point in the future.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...