Trim Removal

[mikeohope]

Anyone have the instructions for how to remove this panel?

 

(Picture copied from another topic)

[tedwards]

I seem to recall removing this panel when I changed the tailgate harness. I don't think it was too difficult - but very time consuming, took a great deal of removing of other bits of trim to get it out, door pillar trims, tailgate rubber & loadbay trim, seatbelt anchors etc etc.

 

Try and get a Ford TIS disk off of Ebay as it has clear step by step instructions & diagrams on removal.

 

[mikeohope]

Brilliant pic, I can see the bit I want to deal with which is the load cover restraining clip. looks like its restraine by two nuts on a nylon post but I bet ford won't sell that as a spare.

 

Thanks for the tip on TIS will have a look.

[Guest wolfie]

there is a post that has all the part numbers on it for the load cover! it may help if you hit the parts guy with the correct numbers and not the usuall I need the bit that holds the thingy in place next to to the wosit

[mumof4]

there is a post that has all the part numbers on it for the load cover! it may help if you hit the parts guy with the correct numbers and not the usuall I need the bit that holds the thingy in place next to to the wosit

 

 

Nice one wolfie!! :ph34r: :ph34r: ;)

[mikeohope]

Thanks Wolfie, brilliant tip, that should do it. That thread also has the other thing I was after which is the instructions to get the panel off.

 

Basically my car was supplied with few duff bits inside. Got the supplying dealer (not a Ford one) to stump up, in cash, for everything to be done by a Ford Dealer on the basis that he had described the car as A1 and it is only 1 year old.

 

My local Ford Dealers suggested bits like this could not be had unless you bought the entire panel and started quoting figures of over