Richard gal Posted April 18, 2007 Report Posted April 18, 2007 Today the gear changing got a little notchy.I noticed the pedal was not coming back up fully, so hooked it up with foot and all was well, this happened a few times.Question is; is it just a sticky pedal or something wrong at the other end. Fluid level OK BTW Quote
Neils TDi again Posted April 18, 2007 Report Posted April 18, 2007 Its a known fault with the main/slave cylinder and will progressively worsen. The solution is to fit a new master cylinder which is a major job, then if that also fails you have to fit a new master cylinder again and have the slave changed also. This requires the removal of the gearbox as it is an integral part of the clutch plate and can only be changed as part of a clutch change. I have the same and am about to get the shooting match changed. Quote
Richard gal Posted April 19, 2007 Author Report Posted April 19, 2007 Oh great! Just still under warranty, will i get it done free before it gets bad? Does it start to lose fluid? Quote
tim-spam Posted April 19, 2007 Report Posted April 19, 2007 Make sure you report the fault before the warrantly runs out - it may be worth putting it in writing if they argue about whether or not they are prepared to change the clutch. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.