Jump to content
Ford Galaxy Owners Club

Recommended Posts

Posted

Does anyone know of a way to bypass the Sat Nav display, so that Aux video will play whilst the car is in motion?

 

I have installed an Aux input device which I bought from another member, and all is working well, until the car reaches about 10mph, and then there is a message displayed and the video cuts off.

 

Would be perfect if I can just get around this little problem. :P

 

Cheers

Guest wolfie
Posted
Would be perfect if I can just get around this little problem. <_<

 

Cheers

 

that little problem is there to stop the idiot behind the wheel getting distracted and killing someone! if your dead set on cureing the problem I have a list people you could do for me :D

Posted
Would be perfect if I can just get around this little problem. <_<

 

Cheers

 

that little problem is there to stop the idiot behind the wheel getting distracted and killing someone! if your dead set on cureing the problem I have a list people you could do for me :D

 

 

Am i on it still?? :D :D

Posted
that little problem is there to stop the idiot behind the wheel getting distracted and killing someone! if your dead set on cureing the problem I have a list people you could do for me <_<

 

 

:D Wolfie - I have my own list to get through first. But I would be more than happy to oblige once that bridge has been crossed :D

 

Mumof4 - That is why I needed the silver coffin currenly lying on the living room floor. I could easily get a small family inside it :D :D

 

Seriously though, I realise that it is a safety thing, but was just wondering whether it could be done.

Posted

yes it can there is a loom that was available but has been discontinued :o

i have one left with i am tring to duplicate ;)

will post my findings very shortly :o if it can be replicated :o

  • 3 weeks later...
Posted
The video is shut off by the GALA signal fed from the vehicle speed sensor usually on a purple wire to the nav unit black ISO connector pin 1, if a switch is used on this line then the video shut off can be overridden, do not put the switch in line with the GAL feed to the 26 way connector pin5 as this will remove the signal to the Sat nav and the positional error will be quite large. This site is agold mine of info: http://vwnavi.com/forums/ Hope that helps
  • 3 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...