dfh101 Posted December 20, 2003 Report Posted December 20, 2003 Can anyone assist me with the procedure to do this. Its a sharan 115pd tdi. Many thanks Derek Hughes Quote
Dave-G Posted December 21, 2003 Report Posted December 21, 2003 <_< On my last galaxy I just removed the dipstick and yanked it orf <_< Quote
Guest SA Intruder Posted December 21, 2003 Report Posted December 21, 2003 Remove dipstick and place where it cannot get grit/cack on it (i.e. not the floor) gently pull the front edge of the cover directly upwards so the rubber "ring" around the dipstick tube becomes clear of the tube. (Put a little WD40 on the ring first to make this easy). Then carefully pull the cover forward (toward the front of the car) to release the two rear retainers. Check that all the rubber bits are in their correct place, spray a little WD on them all, and replace in the reverse order. Quote
dfh101 Posted December 21, 2003 Author Report Posted December 21, 2003 Thanks, Job Done, No screws, just pulled out once dip stick removed. Many thanks Derek Hughes <_< Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.