Jump to content
Ford Galaxy Owners Club

Recommended Posts

Posted

Hello again while i'm here i've got another question.

 

Does anyone know if this is a central locking module fault or a door handle fault.

On my 1996 Galaxy 2.0 GLX Auto Mark 1 when i closed the doors and the central locking kicks in a curious thing happens.

The rear passenger door closes then unlocks, closes then unlocks again leaving me to lock it manually.All the other doors lock fine.This happens everytime.

 

Do these doors have individual senors?

Anyone got any ideas?

Posted
mmm wonder if its the old problem of the wires in the rear hatch breaking down,open up the hatch and look up and right.
Posted

Mine had thatfault and we traced it to the door lock motor. Running the motor with the cover off, I could see it almost getting there, then coming back again.

 

Got a motor from the scrappy for a tenner.

 

A lot of Mondeo motors are the same, get an old one with a lock and swap the locks.

  • 3 months later...
Posted

Did you find your answer Tom, mine is doing the same thing on the nearside rear passenger door, lock and unlocks then locks and unlocks again.

 

Was it a latch spring?

 

Mine locks ok if I open and close the affected door and then lock the car again without doing an unlock first. It is consistent, not erratic.

Posted

Hi Tom. I had this problem a while back. I found it was the central locking motor. I actually transfered the faulty motor from the nearside door to the offside door to check it, and found the fault had transered to the other door. I replaced with a new motor and it worked fine.

Phil.

Posted

I might give that a try, I wasn't sure if the motors were door specific or a generic item. I presume the locking mechanism is specific to the particular door location.

 

If it is a knackered central locking motor unit has anyone got a part number or the mark of mondeo I could get one from?

 

Cheers

Burundi.

Posted

the last one of these i had do this i took a part to see what was wrong

it was one of the two springs inside had gone rusty and broke

i did fix it with a spring out of a pen and has worked for the last

couple of months whilst i was looking for a neww one .

worth a try if your ok to take it apart and its really anoying you

matt

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...