bsgasuk Posted December 15, 2006 Report Posted December 15, 2006 :lol: well seen all the posts on this subject!!!!!!! so here goes!!!!!! my 2007r reads cd1 or cd2 ect but even with no cd magazine in changer!!!!!!! did have a 01 error .......disconected plug to changer but to no avail ...!!!? any ideas?????????? Quote
big_kev Posted December 21, 2006 Report Posted December 21, 2006 Guys can anyone help this chap with his problem..... Sadly I do not have a clue on this......but I am sure someone out there does. Quote
jvernon Posted December 21, 2006 Report Posted December 21, 2006 my 2007r reads cd1 or cd2 ect but even with no cd magazine in changer!!!!!!! Can you describe the problem a bit more? I'm slightly confused at what you're asking for help with and perhaps that is the reason that nobody else has replied? :blink: It could be that everyone on the forum except me knows exactly what you're going on about but just doesn't know how to help; but with the combined knowledge from all the members on here I find that extremely difficult to believe. Regards,James Quote
Guest MATT jr Posted December 21, 2006 Report Posted December 21, 2006 my 2007r reads cd1 or cd2 ect but even with no cd magazine in changer!!!!!!! ...is there a micro switch in the changer that detects when the cd magazine is there or not - if this switch is broke to the "circuit closed" position, the changer will think the magazine is there, when it isnt, and might "attempt" to read the disks. i have never opened up, or repaired a cd changer, so its a complete guess! MJR Quote
Guest wolfie Posted December 21, 2006 Report Posted December 21, 2006 are you sure it's reading CD1, CD2 ..... as on certain OE changers EO1 is no magazine loaded, EO2 is no discs in the magazine! which would be correct if as you say the magazine isnt loaded? Quote
bsgasuk Posted December 22, 2006 Author Report Posted December 22, 2006 ok thanks all!!!!!! even if there is a magazine in the changer or not my 2007 head unit acts as there is and gives no error.... codes but acts as if there is cd 1 playing or cd2 ect ect!!!!!!! also cannot eject magazine!!!seems as if i have lost power!!!!to the changer!!!!!! but if this was so how can head unit act as if cds are playing!!!!!!!! any ideas now!!!!!!! :( Quote
seatkid Posted December 22, 2006 Report Posted December 22, 2006 :ph34r: well seen all the posts on this subject!!!!!!! so here goes!!!!!! my 2007r reads cd1 or cd2 ect but even with no cd magazine in changer!!!!!!! did have a 01 error .......disconected plug to changer but to no avail ...!!!? any ideas?????????? 01 error = "CD Format is now obsolete....please upgrade to Flash based MP3/WMA format" Hope this helps..... :( Quote
big_kev Posted December 22, 2006 Report Posted December 22, 2006 ok thanks all!!!!!! even if there is a magazine in the changer or not my 2007 head unit acts as there is and gives no error.... codes but acts as if there is cd 1 playing or cd2 ect ect!!!!!!! also cannot eject magazine!!!seems as if i have lost power!!!!to the changer!!!!!! but if this was so how can head unit act as if cds are playing!!!!!!!! any ideas now!!!!!!! :( It sounds like the either there are 2 cd's in the same slot jamming the magazine, try selecting a different cd and see if it clears the magazine.I am assuming that the magazine is in the right way up ! clear window at top ! Another option is that the magazine has no power to it, fuse gone or not plugged in correctly. Quote
Guest MATT jr Posted December 22, 2006 Report Posted December 22, 2006 IIRC - when i unplugged our cd changer,, an error message came on the display, something like, "no disk", although ours is a ford 4050 radio. does the cd changer make any noises at all?has the changer worked since you had the car?any possible reasons why it isnt working?have you checked its plugged in, behind the radio?checked fuses? (although ours seems to be powered from the head unit!)do any clips on the magazine, or inside the changer look broken? also cannot eject magazine!!! ...so how do you get the magazine out? MJR Quote
big_kev Posted December 23, 2006 Report Posted December 23, 2006 Its all gone quiet have you fixed it ? Quote
bsgasuk Posted December 24, 2006 Author Report Posted December 24, 2006 Its all gone quiet have you fixed it ?ok to get mag out just simply put paper clip in emergancr hole!! 1 cd per slot!!!! no noises!!!!!!! right wayin/up!!!!!!!! fuse ok!!!!!!!! plugs at both ends conected im now all ears!!!!!!!!!!!!! oh and MERRY CHRISTMAS Quote
HullHornet#30 Posted March 12, 2007 Report Posted March 12, 2007 any luck with this cause i have the same problem. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.