Jump to content
Ford Galaxy Owners Club

Recommended Posts

Posted

Hi guys,

 

My Dads Galaxy has been off the road now for a month due to this problem.

 

The engine will turn over and over but there is no actual start. However, either on a warm day or he warmed the engne up somehow :-/... My dad got it started. As long as it was warm is would start.

 

He has tried new glo plugs, no luck,

He has changed the relay, no luck,

He said there was no power at the glow plugs.

 

Has anyone had this problem before or know of a solution?

 

Dan

Posted

Had a similar problem myself.

Check the cam and diesel pump timing. If the belt appears to have jumped the same amount on both sprockets, the the crank pulley has gone. Dont fiddle about - buy a new one only

Posted

Which relay did he change ? it sounds like the ignition relay that is the problem, cutting of the fuel to the engine.

Check if there is voltage at the fuel cut off valve.

If not connect it direct to the battery and it should start ( as a temporary measure )

Posted

Which relay did he change ? it sounds like the ignition relay that is the problem, cutting of the fuel to the engine.

Check if there is voltage at the fuel cut off valve.

If not connect it direct to the battery and it should start ( as a temporary measure )

 

He swapped the 107 relay...??? He lives in france and Im on the Uk so its difficult for me to have a look myself.

Posted

It's almost certainly is because your glow plugs arent working.

Check F74 (60A) fuse that feeds the glow plug circuit and F32 (3A) that feeds the relay coil.

Both are in the box under the dash. The Glow plug relay is K70

post-892-1159992754.gif

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
×
×
  • Create New...