westie Posted September 25, 2006 Report Posted September 25, 2006 Hi.I havent posted on here for a while, but Ive got a problem that I wondered if anyone could help with. The wife drove home from work yesterday with the windows wide open ( :unsure: ) and said they had been down since she put the key in the lock and turned it the "wrong" way.I know that the windows will open and close via the key, but now I cant get the windows to move back up via the door switches.The only way I can get the windows to go back up, is to put the key in the door lock and lock the car doors.I can lower the windows using the door switches, but again, they will only go back up again via the key in the lock. Please can anyone help? Thanks. Steve , 110 1999 TDI Quote
NikpV Posted September 25, 2006 Report Posted September 25, 2006 I have a simliar problem with one window, so I'm pretty sure that global closing/opening uses a different wire than normal window switches, one of my rear windows will open/close using the internak switches and will open with global opening but will not close with global closing unless I fiddle with the loom boot to that door - check the door boot loom for broken wires - in your case check the drivers door - see the faq for procedure to remove/install the rubber boot *click on the link in my sig Quote
westie Posted September 26, 2006 Author Report Posted September 26, 2006 Thanks Nik....I will have a play. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.