bazzoh

Hi got my s reg 2.8 mk1 ready to go and now am looking at comforts! am going to ditch the exisiting ford radio cassette unit and fit my existing jvc one (because its got front aux input etc). Now, with this car being the ghia x and having the steering stalk remote, what leads will i need to get? i presume i'll also have get a harness adaptor lead? many thanks in advance! Baz

Hi i replaced mine with one out of a scrapper, there was an engine on ebay for

exactly the same as the original engine in mine! chain tensioner gone, destroyed itself into many pieces and then bang - new engine time! i took some pictures of the engine bay minus engine (very roomy!) and the damage but they're not the best..as soon as i find my bluetooth for my laptop i'll put them up! baz

Hi not a bad price at all! and after all that it failed on one of the bushes and a cut in the tyre! nowt about the exhaust! ah well! not bad considering its been stood for 3 years or so! let the fun begin! Baz

Hi finally re-engined the V6 after the original went a bit wrong! ;) now, need to get a replacement exhaust centre box for it as this one seems to be leaking a bit! outside my house is my 2.0 galaxy (oil light came on whilst driving and ...well its a long story!). Now, will the centre box off the 2.0 go on the v6 so i can get it through the mot? any help would be great! ta! Baz

thanks for the info - was considering taking the front end off for better access anyway so may as well do it! thanks again! Baz

Hello! further to my last post ("moving on"), we were trying to start the car (2.8 V6 mk1) ..then there was a clunk...then nothing! Now turning the crank nut, itll turn one full turn in either direction before stopping solid. A friend has suggested that it sounds like the cam chain has snapped or jumped and that its most likely a valve stopping the engine. Ive just read on here that the cam chain is on the gearbox side of the engine? and that its a box out job to sort. Has anyone had to deal with this sort of job? is "head off" do-able with the engine in situ? or is it just worth getting a second hand engine and changing it over - is it do-able with axle stands and crane (ie an amateur!) any help would be gratefully received - am dying to get it on the road and play! kindest! Barry

Hi the guy ive bought it off has replaced the coil pack already (nice of him!) - ive got it back home now (or my dads anyway) and ill go and have a good nose around it and try the bits you've suggested - thanks! regarding the vag com, i think its wise to buy one anyway so ill be doing that - am jsut getting impatient because i wana play! ill keep you informed! Baz

Ta for that - i'll give them a go! The guy said he was told it was an ecu fault but i wasn't convince - i was thinking could it be the throttle position sensor? Baz

Hi for some years now ive run a mark 1, 2.0 basic ford galaxy. Now, ive just invested in a 2.8 v6 (bit of a difference!) but still a mk1. This new one is the Ghia X version with all bells n whistles - looks good! Now, ive purchased it as spares repairs because apparantly the car starts but wont rev (anyone with any ideas?). Failing that, any Ford Galaxy experts in the Wirral area want to come and help me with some looking over advice? i can promise at least a cuppa! I am a bit sad about the old mk1 as it appears it is one of the early ones constructed between 94-95 - preservation surely! but hey ho! thanks in advance Baz

FANTASTIC!! thankyou all so much, we followed the instructions and the revs are now back to normal! so happy thanks! Baz

ok ta! ill try them tomorrow! baz

hi! nah dont think its that as it does drive normally, but when you stop and put it in neutral or even dip the clutch, the revs rise but then sloooooooowly fall ta! baz

Hi no aint got cruise control am afraid! ill throw it on my uncles reader this week and say what it says - as said its wierd especially given that the revs do come back down in stages...eventualy! dont know if its related but whatever it is that sounds like a hoover on startup(!) is sounding very wierd at the moment - hard to describe but sounds more like a drill or something! baz

Hi I have an N reg 2.0 galaxy. The other day all was fine, but when i started the engine again, whatever revs the engine was at when it was driving, it stuck at when clutch depressed. At first thought "sticky accelerator" but the revs do come down - in stages but take about 5 mins to go back down to normal idle speed (about 800-900rpm?). Ive been told it could be the air mass sensor - anyone have any ideas? thanks in advance! baz