Insane_chemist

Seatkid - cheers - ok, thanks for that good hint on the deadlock - I'll try that in the morning and see if I can get the deadlock disengaged and get the door open. I can

Yea, have tried openning via the inside lever and also with key from passenger side. All the other doors open but the drivers. What I can hear is a clicking from inside the door for about one minute then the central locking locks all the doors down again. I dont know of there is a deadlock on the driver door that is electrically operated? - it sounds like its a mechanical problem like the motro is not engaging the lock - alot of whirring and clicking. But lookign thru the forum, I see that almost everyone is talking about about door loom wiring issues!

Hi Can anyone help me get the drivers door open on my Galaxy, it was playing up, but now can get drivers door open with key in lock or central locking via key - so how can I get the door open to fix the (presumably) electrics problem. VCDS tells me I have an open circuit on the drivers door and petrol cap lock. cheers!

...happy to report a successful conclusion -> F11 20A blown (replaced) and headlamp washers are working again! HID Xenons are levelled (VCDS module 29) and all is well again, ready for my MoT test (=CT test) in France next week - many thanks so much George106 and Mirez! I'll make a donation to the site FGOC site for the euros you have saved me!

Gents, amny thanks - just been out and tried it - spot on, got the leveling motros to go up and down in test mode and then stat is still on level ground with handbrake off and ignition on and it seems to have leveled as you mentioned - many thanks. However I still do not get any sign of life out of the washers - is that on the same module or under something else cryptic - cheers again for your rapid replies and help.

Help anyone? the Xenons on my MkII V6 Gal do not level or wash anymore (since about 3 months). Hoever even before that I was never able to get into the Xenon range module in VAG-COM or now the regisiterd VCDS (I upgraded to Win 7). looking at the few post on xenons, other peopel seem to be able to get OK (on diesils galaxy's) but I cant get into xenon adjustment (module 55) via VCDS at all (NB. I have a registered Ross-tech cable/software... at 400 USD!!!). Anyone got any suggestions? VCDS just says module unavailable. As mentiones, I have tried this before when the Xenon system was working and never was able to acccess this module - anyone got a solution else its off to Fords to hand over alot of cash most likely!