fozzer

Hi I've just changed my water logged CL box for a decent one I got from my local scrapyard [ makers code 7M0 962 257H ], It does everything except let me programme the remote, I have tried the usual three key turns but it will not enter the programming mode. When I interrogate it with vagcom it give software code 0005, I tried 0006 which allows me to open just one door with one turn and all doors with two turns. I read elsewhere on this forum that the code 04097 is standard but my module will not accept this. Does anybody know the right code for this box, or, suggest codes to try?

Hi I've just changed my water logged CL box for a decent one I got from my local scrapyard [ makers code 7M0 962 257H ], It does everything except let me programme the remote, I have tried the usual three key turns but it will not enter the programming mode. When I interrogate it with vagcom it give software code 0005, I tried 0006 which allows me to open just one door with one turn and all doors with two turns. I read elsewhere on this forum that the code 04097 is standard but my module will not accept this. Does anybody know the right code for this box, or, suggest codes to try?

A question for all you knowledgeable chaps out there, for a while I have had a slight misfire on my '95 V6 and lack of power on climbs, I checked all the obvious things like coil pack, leads and plugs with no luck, I took it to my local dealer [by the way I live in Spain], he spent 45 minutes on the diagnostic computer and came up with a fault on the cam position sensor, he quoted a price of 45 euros for supplying the sensor, but before I replace it has anyone had experience of this failing and do you think this would cause the symptoms above. By the way for the time spent on the computer he charged me the princely sum of 10 euros!, including replacing a small piece of tube connecting one of the air sensors. The car has done 178k and I did wonder if I had a head gasket problem but the misfire is very erratic and it is not showing any of the usual signs eg emulsified oil, exhaust fumes in water etc Thanks in anticipation Graham

180K on mine and still running fine

How much Steve?

ANYTHING BUT THAT Im too young for pipe and slippers!

Hi I'm running a V6 Ghia with 173k on the clock. most of the time the car is running fine, but now and again, especially when going uphill I can hear a strange spitting type noise which is very hard to describe, almost a putt putt type noise [don't laugh at the back], at first I thought the exhaust was blowing, but its very intermittent, but I wonder now if it is possibly the start of piston slap?. The car is not using excessive oil or water, any ideas chaps.

Item number 7973484178 on Ebay, anyone give me a clue as to what this is, and does it work?

Sounds like roll bar drop links, do search has been covered many times.

JML replacement rubbers are about

Anyone tried the new JML cut to fit "Wonderwipers" ?

CD Multichanger??

Sorry meant to give my address: fozzer2002@yahoo.com

A copy for me please??

My monies on coil pack or HT leads had same problem few years ago