dulux72

Thanks Andy Tried that guy but had no response to my email Oh well just keep looking

Does anyone know of any where scrapping a Galaxy as I need a new rear passenger window

Hi there I had a fault on my ford mfd sat nav and these guys were able to help. They're Blaupunkt's approved repairers and therefore know what they are doing. O. E. Electronics Ltd 5-6 Fourbrooks Business Park Stanier Road Calne Wiltshire SN11 9PP Tel 01249 817370 Fax 01249 817346 Hope this helps Dulux

Cheers for that Dave-G This is a 05 TDI Going to have another look this evening Or its a trip to the stealers

I've disconnected the battery for now as the brake lights are on all the time even when car is locked

Title says it all Any one have any ideas what caused this. After searching the forum the usual fault after flahing glow plug light is no brake lights NOT on all the time. Even when car is locked. Help! Please :P

You need 4 pins in total. Here's a link for a pair on ebay :lol: http://cgi.ebay.co.uk/REMOVAL-TOOLS-KEYS-V...1QQcmdZViewItem

I would second that. The wiring between the door and the body is the first place to look. Our car used the wind the window down but not up. Real pain in the arse,

I'm near Bath but there may be a member nearer to you. If not then maybe we could meet somewhere and I'll run Vag com on it and see what it shows. Just a thought ..... why not take it to another ford dealer and get them to run their fault reader on it. With a copy of that info someone here will be able to help. OR the engine is VW so a VW dealer would be able to do the same.

Hi You need to get the fault code read by someone with VAG COM. Where in the country are you. I am sure that someone here will be close with the kit. That way you will know why the car keeps going to 'limp mode' eg the loss of all power. This is being reset when you restart the car. The fault is when a parameter of the ECU is outside the programmed values. Having the fault code read will point to the problem. Good luck Dulux

Hi there I had a fault on my ford mfd sat nav and these guys were able to help. They're Blaupunkt's approved repairers and therefore know what they are doing. O. E. Electronics Ltd 5-6 Fourbrooks Business Park Stanier Road Calne Wiltshire SN11 9PP Tel 01249 817370 Fax 01249 817346 Hope this helps Dulux

Hi there Can't speak for anyone else but as the cars are virtually the same ask away and I'm sure someone will be able to help. We're quite a friendly lot really

Hi there I had a fault on my ford mfd sat nav and these guys were able to help. They're Blaupunkt's approved repairers and therefore know what they are doing. O. E. Electronics Ltd 5-6 Fourbrooks Business Park Stanier Road Calne Wiltshire SN11 9PP Tel 01249 817370 Fax 01249 817346 Hope this helps ;) Dulux

Hi there I have installed the MFD and the purple wire from the back of the radio is fine for the pulse. You have to set the pulses to 8 but other than that it works fine. Good Luck :angry:

Without a doubt :ph34r:

I have just done this retro fit and there is a difference in my mk2 galaxy The double din hole was approx 20mm too small and the switches were a different shape. It may look the same but trust me its not. The parts are available from the stealers for

To retro fit the Ford Sat Nav in mk2 you have to do the following; Replace the complete centre fascia and all blanking plates and switches. YES the fascia needs replacing as the SATNAV is about 20mm bigger than the 6000 RDS Install a new wiring loom adaptor and GPS ariel (From Ebay) And connect the speed sensor wire / gala (Purple Wire) The MK2 DOESN'T have the VW/Audi Radio loom its the crap FORD one. So you need an adaptor to convert that too.

:huh: WHAT A STAR :D Thanks exactly the info I needed Will give it a try and let you know Many thanks

Hi Justice What year is yours and I'll try to help

Dally Did you manage to understand my email and access the info ?? :huh:

LOL I take it she doesn't read the forum. Hopefully with dally's help it'll be sorted.........

Thanks Dally I have sent you an email explaining how to get to the screen in which the info is shown. Many many thanks

OK here's a further update The position IE: LONG & LAT is correct I have checked this with another device. :huh: BUT its wrong on the map. As I have said its about 300 metres out. I have taken Johnb80 advice and driven for about 40 mins and the screen updates etc but the position shown on the screen is wrong. Could the CD containing the maps be wrong ??? :( Has no one got a factory fitted system ???? ;)

Well let me explain I had the single disc 6000 RDS Ford Radio To retro fit the Ford Sat Nav you have to do the following; Replace the complete centre fascia and all blanking plates and switches. YES the fascia needs replacing as the SATNAV is about 20mm bigger than the 6000 RDS Install a new wiring loom adaptor and GPS ariel (From Ebay) And connect the speed sensor wire / gala (Purple Wire) Oh and get an up to date copy of the navigation disc I have done all this and it looks great and works BUT because I need to set the pulses per rotation and wheel circumference the maps are currently about 300 metres behind my actual position. Hence the request for the info from someone with a factory fit system.

Hi there Could someone help me get the correct figures for the factory fitted sat nav. I need to tell the system the number of pulses per revolution and the circumference of the wheel. This info is stored within your installed system and would really help me out. Don't worry about accessing it as I can talk you to the correct screen to get the info. If you have sat nav as a factory fit please can someone help me with this. :unsure: