Jump to content
Ford Galaxy Owners Club

chrisb

Members
  • Posts

    5
  • Joined

  • Last visited

About chrisb

  • Birthday 05/20/1942

Profile Fields

  • Vehicle Type
    Galaxy Ghia 04/2006 2.0d LHD
  • Vehicle Model
    Ford
  • Region
    South

Profile Information

  • Gender
    Male
  • Location
    France, Languedoc - 30 minutes from MedAudeDeprtment
  • Interests
    Barn conversion, operating self catering vacation rental in the Mediterranean SW of France. Sailing. Being self reliant

chrisb's Achievements

Newbie

Newbie (1/8)

0

Reputation

  1. Thanks to iantt who provided the following solution. Cut away a flap at the rear of the plastic cover seen on the floor of the boot. The edge of the latch is visible either through a slot or at the back (towards the front of the car) of the steel plate. Pry this to the right and the latch pops. No need to cut the boot trim, which at least on my model has no attachment screws ( someone else told there were), just clips all round requiring brute force and ignorance to separate it from the door. I still have to resolve the underlying problem, which does not seem to be damaged wiring where the wires enter the boot.
  2. Thanks for letting me know, Brian H. I found the answer - I will check the MkIII section Chris
  3. Perhaps I am doing something wrong as I have had no response? Please help. It's a LHD Mk III Ghia. Everything works fine except the tailgate will not open. The tailgate has a small push button that should operate the boot release but does nothing; makes no sound locking or unlocking using the buttons on the key. So, reviewing all the previous post it seems like an electrical problem. I am unable to remove the trim cover from inside the tailgate cover and although I can separate the cover at the top edge below the window cannot reach down to the the tailgate latch mechanism. Unless anyone has an other ideas it looks as if I will have to cut a hole in the door trim to access the release lever from the inside - I assume there is such a lever!? If so, whereabouts do I cut the hole? I would prefer just one, that I can make a simple removable hatch for rather than starting at the bottom and keeping going till i find the right place!
  4. All doors and filler cap OK but boot will not open/unlock. There is no keyhole - just electrically unlocked with remote. I have read all the existing responses for this problem. Have pulled cover partly off but even with crow bar cannot get enough space to get arm in. I did manage to break most of the clips in my efforts. Boot cover has cut outs each side for rear bulb replacement but I cannot reach in. There is rectangular lump in bottom of cover below right hand rear light cover (left as you face back from the inside) that presumably covers some device. Happy to cut a hole in the cover if that's the only way but would like to know position to avoid holes all over.
  5. I need help with similar problem. 2006 LHD galaxy Ghia 2.0 tdi. All doors and filler cap OK but boot will not open/unlock. There is no keyhole - just electrically unlocked with remote. I have read all the responses for this problem. Have pulled cover partly off but even with crow bar cannot get enough space to get arm in. I did manage to break most of the clips in my efforts. Boot cover has cut outs each side but I cannot reach in. There is rectangular lump in bottom of cover below right hand rear light cover (left as you face back from the inside) Happy to cut a hole in the cover if that's the only way but would like to know position to avoid holes all over.
×
×
  • Create New...