xv1600aOwner

Its worth a check but i thought this related to the pin 16 power supply. Thanks. Will check asap

Hi again This is a Galaxy MK II 1900 TD Is the PCM also called the ECU? If so is it behind the battery? Also does anyone know what the ICL is? and if possible where it is please? Thanks Jay

Hi I am new to the group and any help with this problem will be greatly recieved. I have 2 galaxy's but i am having trouble with my 2001 model MKII. My diagnostic scanner (Scantech) says it is connected but show nothing on screen. The problem is i need to code a key as the original key got damaged and broke the chip. I have taken it to ford who says that none of the systems are talking ( same as i got). Picking up a connected signal but not talking to either the ecu, abs, airbag or CAN line etc. Have found online a wiring diagram of the standard diagnostic plug and found a possible difference. The only thing i had to check this with was an Ohm's meter. Listed was, Pin 2 - J1850 Bus+ ===No wire connected 3 - LS CAN Hi == No Signal 4 - CGND == Chassis ground ok but after 10 seconds when a relay clicks otherwise 19 Ohm 5 - SGND == Signal Ground OK but as chassis ground 6 - Can High == No Signal 7 - K - Line == 29 Ohm at all times 10 J1850 Bus- == No Wire 11 LS CAN Low == No Signal 14 CAN Low == No Signal 15 ISO 9141-2 L-Line == No Wire 16 12+ == 12V ok Can any one tell me if what i got was right or how to test it properly please Any help appreciated. BTW all the car electrics are working perfectly ok. Thanks Jay