big_luke

as title really, i'm gonna fit a isso block to my standard wiring as it was hacked about by last owner and instead of buying the standard plug then buying a converter, i'm gonna just fit the isso block i need to know what ones are what? i've had a quick google but cant find anything

bump

bought from scrappy thinking mine where dead, they arnt, it was my fuse box, £10 plus postage all working fine, tested on my galaxy

will a mk2 rad fit a mk1? i need a rad for my mk1 2.3 and i can only find mk2 ones, i have put up a wanted thread for a rad also

i need a radiator for mk1 2.3 petrol, the only breakers near me that has 1 wants £50 for it!!! has anybody got 1 on here? or will 1 from a mk2 fit?

Lol wasnt there on mine..but i changed the fuse box and it all works fine

Solved....the fuse box part with the circuit bored in was fooked....changed that and now everything works

checked there, checked both kick panels, and under the dash, under BOTH front seats, cant find it anywhere,

i have a mk1 (99) reg galaxy and need to find this, where is it, i have looked under the front seats, and looked in front kick pannels, behind fuse box.....cant find it

where is the central locking modual/ecu/black box on my 99 galaxy?

yeh will check them again when i can get to the car as it's not at my house, i have no drive and it's not road legal atm so my mate is letting me use his drive

the wires in the rear hatch have been repair in the last yr/1k miles, my friend had a quick look at his garage earlier when i was looking the car over(and under) at fueses and he said they are all fine,

hi, i got a ford galaxy today, V reg, 2.3 petrol, zetec trim? chrome grill, cruise controll climate controll ,arm chairs etc, anyway, i bought it KNOWING that the rear doors didn't open and indicators/hazards dont work, and no mot/tax, got it cheap with a promise of refund if it costs to much to fix(from my friend) now, is there anything that causes these problems? i notice the passenger footwell is very wet, and i read somthing about a "black box" on another site from a quick google search, but can anybody explain or advise? it starts and runs no problems, i can hear the central locking working on the front doors, and they open fine, also, the rear hatch only opens with a key, handle isn't working, where should i be looking at 1st for getting these all working? would this "black box" thing be the cause of all these problems issue A: i have run a power wire from battery to 1 of the wires on the rear doors to unlock the motor, i can now manualy unlock and lock the rear doors, but ALL doors have to be locked and unlocked manualy, central locking is.t working, i can hear the motor in drivers door but it only does the drivers door, would this be caused by the central locking ecu(black box)????? issue B: indicators still not working, ran power to the rear circuit board and lit up the whole side of that car(indicators) hazard switch not working, indicator switch not working. issue C: front and rear lights work fine(apart from indicators) BUT when u try to put high beam on it wont hold, it just like your flashing hi beam, could the stalk be the problem for issues B & C??