arryp0tter

HEEEEEEEEEllo peeps my 1.9tdi seems to not have a heated front screen that works. the light comes on ans stay on for around 10 mins etc but screen when frosty stays frosty. read a bit in tech section on my old mk1 the screen connectores were either side of dash and behind interior light for earth. checked all this on my mk11 and no wires removed window pillar trims as well and nothing same with behind interior light so where are the bloody connectors please. i have checked the fuse box out and both fuses seem ok but till i find connectors i cant tell if i have a power feed or an earth. only wire i found was what i assume is areial wire down drivers windsreen pillar . and yes before anyone asks i do have a heated front screen i have nice wavy squigly bits in me glass ( my old mk1 broke screen and i had plain glass fitted as was not paying 400 quid for heated that didnt work. ok guys your help would be very valuable.

Bugger that for a game of soldiers it WILL go back from whence it came ( fleebay ) i am not buggering around with all that for something i will prob only use when there is no 'y' in the week but have to say a very very big thank you for the extremely useful link. big thank you to all on this wonderful web site

hi have 2002 gal bought a luggage cover for the beast but have no forward holes to clip it into any ideas please it is a 2002 tdi thanks

whilst it must be said that the air con problems on gals is almost 'inbuilt' i dont think it is really fair to lay the blame for this at the door of good old Henry , remember till mk111 these vehicles are just about rebadged vw/audi stable mates and the problem should really be laid at their door. When a problem occurs in life after a few repeats we modify the item or do it adifferent way to avoid the problem but it seems to me that despite bucket fulls of problems all the same that they have just been swept it under the carpet instead of dealing with it in a responsible way. Typical of todays modern mass produced car production. lets face it the problems with these cars dont just stop at air con does it. and yet despite the many problems we all encounter from thime to time ( mainly all the time) what do we do when our beloved beastly Galaxy comes to the end of its life WE BLOODY WELL GO AND BUY ANOTHER ONE are we all totally mad, no i think we do it for the comradery this forum provides , we unite in our grief lol then again we could all go and buy a Kia Sedona!!!!!!!!! or a Zafira!!!!!!!! or a Voyager !!!!!!! Na, stick to what we know best. :lol: :lol: :lol: B) B) B) :lol: :lol: :lol:

hi chromedome been there done that mate been round the houses so many times with this my latest version of TIS is 2004 was wondering as vista didnt exist them wether its 'uncompatable' was going to try my original genuine disc but force it to run under a different sys via the properties box will see what happens but thanks anyway

Good morning people i have a wee problem i have several versions of the TIS program including a genuine Fraud issue one, the prob i have is no matter what i cant install it i click install and nothin happens. this is no matter which one i use inc the original. I am running Vista in 32 i did read there needs to be a certain dynamic link library file in windows system 32 this file is present and just for good measure have replaced it to test the theory, i just cant figure out why i cant install it any ideas would be welcome i can send screenshots of what i have on my system etc need to get this working to sort some probs.

yes check sensors and also check to see if your rear washers work if not then your rear screen wash pipe has come adrift and you may have flooded the under seat compartment if so then sensor control unit may be fried this advise carries no responsibility but check all the above thoroughly you can test sensors with vag-com.

there is a super family orientated camp/ caravan site just outside Great Yarmouth called Rose Farm touring Park it is wizzo go to ukcamp .co.uk and see reviews or go direct to site webpage:- www.rosefarmtouringpark.co.uk ( i created and maintain the site and have camped there for the last 6 years you wont regret a visit.) happy camping we have a Jamet Arizona trailer tent pulled by 1.9tdi gal

:) hi folks this may be a silly question Have recently put a new towbar on my 2002 tdi gal just fitted normal towbar wiring and all is fine with life no probs at all. I was wondering what, if any, fitting a vehicle specific connection kit would make . At present there is nothing other than indicator buzzer to say i have anything connected to the back end. your thoughts please.

hellopeeps isnt it annoying when your battery goes flat or you disconnect it by mistake and you loose your radio coding or you buy a car with no code well i found a handy little code finder and it works on the ford M series radio ( well seems ok with mine) i bought my gal with no code and wanted to get one for free. i downloaded this prog entered my Mcode of top of radio and it gave it to me i ran this test repeatedly over 2 days and evrytime i got the same code so it is good i think so before i go any further would someone who knows there code anyway give it a try see what happens the prog is here http://rapidlibrary.com/index.php?q=ford+radio+code if you use windows vista you will need to add a missing dll file to system32 but thats easy to find. the prog just gives a radio front enter the Mcode, select the 5 button and radio code will be given try it see what happens please.

hi i have a 2002 tdi which doesnt have cruise fitted as standard i was gonna get bits,ie switch pump etc and fit. Or should i go for an after market product? your views would be a help. Also does the diesel on mk11 use same pump as mk1 petrol behind pass headlight etc etc always packin up on my old mk1 petrol

hi guys have a small but very annoying problem one of the glove boxe on the dash ( on top ) has its little rubber buffers missing as i recently aquired the car and am slowly going round sorting its little niggles i went to the local Fraud dealer a mr Allen Fraud to be exact only to be told by parts dept that the buffers are not available seperately and i have to buy a whole new glove box tray As there are ladies who read these posts i wont even go down the avenue of cost as its obscene anyone any ideas as a suitable replacement or if these are available seperately would they be under a vw number as everything i touch on the bloody car says vw or audi your thoughts appreciated by way its a 2002 1.9tdi

mum pardon me for asking but do you ever go anywhere in your toyota as the milage never seems to alter or have you got a broken speedo cable :lol: :lol: B) begins to look worried :lol: lol

Hello people i bought a vagcom lead and disc other week from fleabay finally found enough time to install it today and test it on my nagging parking sensor problem ( see previous posts) well had few probs initially setting it up but hey i got it working and there was quite a list for the parking sensors but then things went sour . All of the faults listed suddely went blank and i then got a message that the vag program had stopped working. When i rebboted everything i could not get things to work. Now having read the read me file on the disc as i am a vista user i need to use the vsta driver however whilst there is a vista driver on the disc there is no way of installing it. 2 questions as all else on laptop is fine i am assuming my vag prob is down to incompatability ie vista driver not downloaded. or does the installation auto select the driver cos it knows you have vista? i have vag com 409.1 version for my 2002 1.9tdi is there anywhere ( hooky or other) where i can obtain a full version of vagcom without shelling out dollars ( am poor dont work as severe diabetic with problems cant work) am i barking up the write tree with this or should i re install vagcom for the 3rd time and try again. ok enough gabbling but all input welcome

thanks for your input Mirez and again from what i have read regarding these sensors ( found a very good reasoning on a bmw site ( apparently some use the same sensors) the frequency thing is logical i have me a vag=com just not round to firing it up yet so maybe i will install it and give it a road test thanks for the help i enjoyed a wasted afternoon in the sun putting my tests into action lol You can't make the assumption they are all working just because you get a voltage on the signal line as you don't know what you are measuring there. If its an analogue signal it could be putting a "dead" signal out in the low Hz which would show as a voltage, and a "healthy" signal of faster Hz would still show a voltage of similar reading. Without knowing exactly what the sensor sends, measuring a voltage from it is almost irrelevent. I wouldn't ignore the "check for tick" suggestion as that will tell if the sensor is actually doing anything, VagCom would tell you if you have a sensor gone though, and more importantly it would tell you which one(s). That said my own reasoning would probably lead to to conclude the same as you that the controller is defective.