eddie2008

No one other than the dealer has looked at the pins but feel it is very unlikely they would own up to this? Pretty much resigned to sorting it myself given this and delay in getting parts. Assuming the cabling can be sorted out are you saying it is possible to solder another pin or two to replace missing damaged ones?

I am new to this site and signed up because I have the same problem with the door harness. Currently off side windows and locks not working. Dealer also charged me

BTW I meant the pictures, not the doors. used the FAQ to get the harness connectors off, but didn't need to I think, as the boot was loose at the other end. There was a broken (completely broken) red and yellow wire. One of the brown wires had a crack across it too, but have left that for now. Should mention the symptoms: drivers window not working, other windows would only go down from central control, but not up again, but worked completely from their on-door controls. Answer, the red and yellow wire! Dealer charged around 100 pounds to diagnose problem. They diagnosed a faulty switch, and three worn wiring looms. They estimated 600 pounds to fix, including parts and labour. My charge to diagnose: 10 minutes to register for forum site and find problem, approximately sod all pounds. To fix, 25 minutes of mucking about, mainly trying to get the connector back out of the 'a'pillar, three minutes to solder wire, and 10 minutes explaining to the kids why they shouldn't use the words that Daddy was using. Not the best fix I guess but I can replace the loom if I want after I research how to get the door off. Cost was scraped knuckles (again trying to get the connector back in),and a couple of drops of solder. But, oh, the fun I'll have trying to get the money back from my dealer! Priceless. thank you all! bb