Jump to content
Ford Galaxy Owners Club

Amarok

Members
  • Posts

    152
  • Joined

  • Last visited

About Amarok

  • Birthday 10/15/1957

Profile Fields

  • Vehicle Type
    Galaxy Ghia 1997 2.3 Manual
  • Vehicle Model
    Ford
  • Region
    South

Profile Information

  • Gender
    Male

Amarok's Achievements

Advanced Member

Advanced Member (3/8)

0

Reputation

  1. It sounds like you have an Airlock or possible blockage in the system somewhere The rear heater is via the run on pump and as you say its cold so again I suspect its not fireing up the glow plug. This would be my course of action here 1. Get a new thermostat and fit it 2. Flush out the system 3. Refill and Bleed the system ( I would just use water at this stage) Heater on Hot 4. Take it for a run around the block and get it up to operating temp (80 degrees ??) 5. Drive home and park up and keep the engine running on idle for at least 10 minutes (feel the main pipes in and out of Rad) I gently squeeze them a see the water bubbling in the expansion tank. check for leaks and that the fans come on to cool the engine if all is well let it cool down and empty the expansion tank and refill with anti freeze (it should take around a litre of NEAT anti freeze) please note Neat as this will mix with all the fresh water and bring your anti freeze up to the required mix. Same procedure drive around the block or only a couple of miles till warm back home again 10 -15 minutes idle and see if it looses water. The Anti freeze will find the weak spot VERY fast. Its better to fix the leak then use Radweld to fix a leak this stuff blocks up your heater matrix and never really works BARRS Leaks is the only product I have found to stop leaks around Core plugs etc (MOD has BARRS leaks Sticks in the toolkit to fix bullet holes) BUT as I said this should be your LAST resort Best Wishes Mike
  2. Thank you for the replies, I will check the sensor tonight and report back Kind Regards Mike
  3. Hello everyone, it has been some time since I first posted and since then I have managed to offload my troublesome MK1 2.8 Auto and I now have a really nice 1997 Ghia 2.3 manual :-) I am extremly pleased with this one as it starts and stops and hasn't missed a beat. When I got her the previous owner said the Aircon worked occasionally. So with the nice hot weather we have I gave it a try and yes nothing ! off I went to work and yesterday afternoon after work with the interior like a blast furnace I pressed the aircon button (Non Climate) and like magic ice cold air was wafting around the cabin. To be honest this was super cold and ran all the way home (25 miles). Today out this morning same issue no aircon but again in the evening Blast furnace again and again like magic Ice cold air con!. Can one of you kind people give me a run through on the electrics on a MK1 Galaxy air con system please ?, am I right in thinking there is a temp sensor somewhere ? Kind regards Mike
  4. Welcome to the Forum, from your description it does seem to be a intermittent fault so I would suspect there is a relay that is not working correctly (Relay 30 appears to be the root of all evil) so hopefully it not a sign of danger !! There is a switch on the dash to turn on the rear fans Cruise control usually a perished pipe Aircon not working :D pretty standard for the galaxy I'm afraid try a regas at Kwik Fit could do the trick if you are a AA member you can get Parts & labour cover From
  5. http://www.f150forum.com/members/akdoggie-41788/albums/service-manual-1997-2003-04-h/36668-instrument-panel-backside-light-bulb-replacement-1997-2003-04-h.jpg Dennis, it sounds like the bulbs have blown on the instrument lighting, you can change these there are 4 bulbs in total go to Halfords and they will help and get yourself a Galaxy Workshop Manual
  6. The box is not shifting to 4th (Overdrive) I'm afraid I have a 2.8 Auto and like yours it has a mind of its own. One day it will drive smooth as silk the next it will hard shift 3rd and 4th then after it gets warmed up (25 miles) drops to 3 gear and you have to floor it to get the box to change up right on the red line then when the revs drop below 2800 it drops back to 3rd and rvs the rocks off until you red line it again and it will shift back then the revs drop below 2800 and here we go again !!!! the 2.8 i going hello 2.3 manual
  7. Hi they are the same, you need to turn the backplate around (unbolt and turn 180 degrees) I have a 2.8 and got a 2nd hand compressor from a 1.9 TD !! :)
  8. Many Thanks Kind regards
  9. http://i120.photobucket.com/albums/o192/Amarokuk/IMG00006.jpg Hello all not sure what type of bulb here can anyone advise please Also the bulb on the Auto transmission indicator
  10. I managed once to change the oil seals with the head on (Ford Escort MK3 XR3i blast from the past) I managed to get some rope in through the spark plug hole and with the piston forcing the rope which in turn forced the valve shut I managed to do it BUT it was bl00dy awkward and compressing and uncompressing the springs was fun and if I dropped a collet well game over !! ;)
  11. Sounds like we are back on track people ;) I have a good feeling we are on the mend
  12. one thing you didn't mention was the Radiator ? on a diesel Frontera I had , that would heat up under load, and if you didn't catch it would boil and would spew out water through the expansion bottle, BUT would run spot on the mark temp wise if you pottered around town, like you I went through the card pump, hoses, pressure test, flush, back flush, stat out new stat and still no luck, in despration I got a new Radiator and BINGO never overheated ever again now the old rad didn't have a leak but i suspect there were a large number of cores blocked so it was only operating at 50% efficency. I would get the rad out and give it a good flushing
  13. I have just read the orginal post due to the hijacking it is a tad confusing to say the least.. We start with an enquiry as to why the tickover is running high 1. More often than not the car starts first time from a cold start, but it suffers from a little bit of intermittent hunting on tickover, idling at just over 1000rpm when settled this is classic Idle control valve fault, dirty throttle or air leak. 2. After a few minutes it cuts out completely, losing all power to PAS and ABS making it difficult to steer or brake properly, an obvious concern ! Usual routine is hazards on, ignition off, out of gear, restart straight away and off we go but this is obviously not ideal if out and about for any length of time. again if on tick over it all points to icv etc the orginal post was signed off with 3. Given the car seems to start pretty well when asked, im inclined to think the ignition system is OK but hard to tell. I am leaning towards a fuelling issue, but the fuel filter was changed 15k miles ago so doubt its that. Possibly a relay 30 issue ? having trouble finding one anywhere though, no garage near me has one. No engine lights are on which i am advised will be if there are error codes on the ECU so to sum up it started ok BUT had a idle problem which on occasions would cut out. again ALL the symptoms of a air leak/ ICV/ dirty throttle nothing to indicate a ignition fault like plug breakdown or rough running... jump a couple of days and Was great fun this morning, wouldnt start for ages, started, ran for 30 seconds and cut out - wouldnt start for love nor money on demand, finally started after 20 mins and with some 'persuasion' of the throttle, got me to the train station 2 miles away. Would seem i have both issues ! Err No.. we no have a new problem was this after you had cleaned the valve or it just didn't start ??
  14. look under the car drivers side and you will see the fuel filter, you don't even need to jack it up. It is a throw away item and as I said before don't assume anything plus this would be the best point to check fuel flow. If like me due to petrol cost's you let your tank run dry frequently you could end up with a fuel filter that is blocked after 5000 miles ! At the end of the day its only purpose in life is to filter the crap that can block the injectors.
×
×
  • Create New...