bobbyrabs

trying to replace 501 indicator bulb , removed wing mirror cover removed lense ,removed electric conector how do you remove the bulb, do you need to replace the whole unit

http://youtu.be/GIBJJEzaSeo hope it works

still wont upload i have posted a video on you tube

your right f17 mini fuse i had the same problem kept blowing fuses if put in the wrong way, nightmare, why this happens unknown also had the problem of lights not going fully out solved it by leaving third row festoon as it was good luck to you get a good suply of fuses when you replace fuse everything will work as normal

have they stopped for christmas ?

still cant upload pictures 18/12/13 will keep trying

i understand

I tried to upload pictures keep getting an error messege

you cant put them under the fog lights that's to low, they have to be 250mm or above or you will fail your mot , I fitted them to the lower grill they have to be 600m apart and at least 400m from side of car, they fit in between the gaps in the lower grill they just screw on , you then have to remove one of the lower side lights/fog lights the one nearest the battery is best, unscrew the two screws underneath the lower light then prize of the light very hard there are two clips at the top then remove side light then splice the positive wire with the one for the drl kit it will tell you on your kit which wire, I got a Phillips kit from ebay 64.99 you can get them on amazon too but are dearer no photos yet will get some

found out myself its the side light the one at the bottom case closed

when fitting day time running lights to a ford galaxy should you wire them to the live wire of the 501 bulb at the front side light , as they come on first when you switch on side lights not to the top ones.

i swapped all my rear bulbs over to led and got no warnings at all and they all went out when ignition turned off ,they where the canbus error free ones, but i noticed the ones that are not error free can sometimes stay on i have tried them in the past , any way after all that i swapped them all back to the normal bulbs as they are illegal to use and were not up to the quality of the normal bulbs.i was just interested to know if the new led tail light would work but knew it would not be straight forward .they might even be a different connecters aswell

just wondering does any body know if the led tail lights for the mark 4 galaxy work on the mark 3, just interested to know

i assume I am to late with this but the plastic trim round the door opener just comes off pull the door opener as if opening the door and the plastic trim should fall off as long as you have removed the screw of course you will not damage the window you will not even see the window it is behind sound proofing you will just have some plugs to unplug when all the screws are undone push up the door trim to free it nothing should break

its the part of the seatbelt that connects to the anchor point on the rear two seats it comes right off and you can push it in to this slot

I don't think its the door solenoid its got some thing to do with dead locks I think, but could be wrong

did you give it enough time to heat up

you still have the right for them to fix it they usually give you a 3 month warranty when you but second hand ,but I don't know when or where you bought it of course, tell them your are going to the citizens advice this usually works, know your rights .

yes that's right open compartment to right of steering wheel and look at the top there is a flap pull

yes its water I get this on the galaxy they are fine if It doesn't rain for a while and they get time to dry out

this link is no use mate you don't need to take off the door handle remove as above door handle and trim all come off together

problem solved faulty rear door control module...................

yes i think it could be, if it was a fuse f10 cental fuse box nothing would work from driver or passenger switch ,also interior light would also be out

its easy to do ,open the door look round the edge of the door panel remove all the screw all the way round and there is also a screw behind the door opener remove plastic cover with small screw driver and thats is simple .no levering needed

door panel removed easy, no wiring problems seen, i think its the door control module