
hd3sanj
Members-
Posts
19 -
Joined
-
Last visited
Content Type
Profiles
Forums
Blogs
Everything posted by hd3sanj
-
Egr Covered In Oil...
hd3sanj replied to hd3sanj's topic in Ford Galaxy Technical Section MK I MK II
Thanks guys , the oil needs topping up every 3-4 weeks but not by much & I will look into blocking the egr... -
hi all, as a few of you know i have recently fitted a new run on pump on my 05 tdi & whilst i was doing this i removed the pipe off the egr to gain better access, as i removed i noticed oil so gave it a wipe & checked it again 2 days later & it was covered in oil again... is this early signs of turbo on its way? the car suffers limp mode somtimes on high revs but if you flick the key its fine again... i have been looking at other posts regarding the egr but they all mention sutt not wet oil. the pipe that i removed i think runs down to intercooler but not sure , i removed it from the top in front of the run on pump. what do you think guy's? the millage is 160,000 but serviced regardless of cost, in the last month i have fitted water pump , run on pump , thermostat , clutch & flywheel with loads of other little bits/bushes & now this...
-
Help Heaters Blowing Cold Front & Rear...
hd3sanj replied to hd3sanj's topic in Ford Galaxy Technical Section MK I MK II
thanks tona , i will give it a go on mine & see if it help's.. -
Help Heaters Blowing Cold Front & Rear...
hd3sanj replied to hd3sanj's topic in Ford Galaxy Technical Section MK I MK II
Changed the run on pump & I do get some heat but it's allot warmer at higher rev's then cools down at lower revs , the rear heater is still blowing cold , anyone know if both pipes should be hot to rear as only 1 is on mine & the other is cold... -
Is There Anyone Who Actualy Knows ?
hd3sanj replied to hd3sanj's topic in Ford Galaxy Technical Section MK I MK II
Touched a nerve guys... Sorry if I offended anyone but if only the reply's were as quick on my first post & dave no my names not sanjay... -
Will Vag Com Show Why My Heaters Arnt Working?
hd3sanj replied to hd3sanj's topic in Ford Galaxy Technical Section MK I MK II
Thanks for the reply's , I booked it in to a specialist & hopefully they sort it.. -
Ford Galaxy (mk 2) Cabin Heater
hd3sanj replied to EalingBob's topic in Ford Galaxy Technical Section MK I MK II
Same problems with mine but after a new water pump, Run-on pump ,thermostat & heater fan its still the same just blowing cold all the time... -
Help Heaters Blowing Cold Front & Rear...
hd3sanj replied to hd3sanj's topic in Ford Galaxy Technical Section MK I MK II
if i get the galaxy on a vag com would the heater show any faults or are they seporate from ecu? the air its blowing actually feels colder than outside (front & back) , i dont want to pay for pluging it in just to find nothing shows... -
Help Heaters Blowing Cold Front & Rear...
hd3sanj replied to hd3sanj's topic in Ford Galaxy Technical Section MK I MK II
i have a run-on pump on order as mine was making no noise , just wanted to know once i replace it will it stop my heaters blowing cold or should i expect to change somthing else, i noticed my temp is not going above 90 & my fans have not worked or do they work when its hotter? -
Help Heaters Blowing Cold Front & Rear...
hd3sanj replied to hd3sanj's topic in Ford Galaxy Technical Section MK I MK II
has anyone a pic of the run on pump as i cant find a post regarding location & with the ones i did find they have had the pics removed... i think i know where but not sure... when i turn ignition on i can hear a humming from above the fuel filter but in scuttle panel not in engine bay.. -
Help Heaters Blowing Cold Front & Rear...
hd3sanj replied to hd3sanj's topic in Ford Galaxy Technical Section MK I MK II
thats exactly how i bled the system but with no change to heat , been looking for posts on run on pump & whats the symptoms & how to check operation.. -
Help Heaters Blowing Cold Front & Rear...
hd3sanj replied to hd3sanj's topic in Ford Galaxy Technical Section MK I MK II
Out of interest, how are you bleeding the system? I was under the impression it was self-bleeding so haven't tried a manual bleed. i thought it was self bleeding but not sure.... do i need to remove any pipes or plugs? -
Help Heaters Blowing Cold Front & Rear...
hd3sanj replied to hd3sanj's topic in Ford Galaxy Technical Section MK I MK II
thanks for reply , was just wondering is it possilble im not bleeding the system right? i have had it where the heaters did feel warm & not hot but after topping up with water they were ok.. (now they are cold all the time) -
Help Heaters Blowing Cold Front & Rear...
hd3sanj replied to hd3sanj's topic in Ford Galaxy Technical Section MK I MK II
The bottom hose from radiator carries cooled water back to the engine after passing through radiator so will always feel cool even in summer. thanks for reply , was just wondering is it possilble im not bleeding the system right? i have had it where the heaters did feel warm & not hot but after topping up with water they were ok.. -
Help Heaters Blowing Cold Front & Rear...
hd3sanj replied to hd3sanj's topic in Ford Galaxy Technical Section MK I MK II
with so many people with the same problem i was thinking it would make life easier but has nobody managed to fix...? i have recently in the last month spent a grand on my galaxy just servicing inc... clutch/flywheel,bushes/ball joints,heater fans,belts/pump...the list go's on. i have only had it back a week when it started doing this.... -
Help Heaters Blowing Cold Front & Rear...
hd3sanj replied to hd3sanj's topic in Ford Galaxy Technical Section MK I MK II
hi, its a manual heater & with the pipes going in to the bulk head they do get warm.. the only pipe that felt cooler than the rest was the bottom hose... not checked rear pipes yet.. -
hi all , im new to this forum & needed some help, i know this question has been asked a few times but with no exact solution.. i have a 05 ford galaxy tdi & recently its heater has been playing up by only blowing cold air ,the water pump has been changed so i thought that this might be caused by an air lock or thermostat but after replacing that & trying to bleed i noticed that the bottom hose on the rad was cold even once engine reaches 90 , its not over heated on me & it stays at 90, there's no oil/water mixed or loss of water... after reading a few posts on here i thought it could be the over run pump but i dont want to change somthing to find out its not that...