kevinfran

Well the bugger wouldn't start last night!!!!!!!!! But it fired up second time this morning? took about 10 mins to blow out reasonably hot air but that was just sitting at tick over. Couldn't hear the pump last night but was working this morning so looks like will have to take that off and have a look.

If anyone is interested replaced the glow plug on mine today. The part number is Beru 0 100 226 340 German and Swedish number is 180VG0080

thank you

Probably been done before but had a look through and can't find anything? Is the part number for the glow plug 7D0 963 319 the same for mk1 and mk2? Mine is a 200 mk1 and dealer has no part listed for it. Thanks.

Didn't go outside today as have cold hopefully better tomorrow.will take piccy's then. In answer to 2nd question Dash out 45 mins,There are 2 very awkward screws hold plastic brackets on back of dash ,access then under wipers above metal leading to scuttle tray.On dash's at scrappys have not bothered to undo just a hearty yank from facier. oh remember to unplug speaker's and heat sensor I always forget one lol. heater element. There's a tubular double barrow piece of plastic that goes from heater matrix through to the engine bay which is held on by torx screws.Make sure you have a spare one if possible it saves alot of time if you cut it. Also the engine bay to heater pipes are prone to rotting so recommend have spares also you wiil need to have vagcom if you have a passenger airbag. Thanks for that will probably have ago next weekend as getting $$$$$$$ with the smell of antifreeze although no loss of coolant. will this lead fit my mk1 2000 galaxy? http://cgi.ebay.co.uk/VAG-USB-DIAGNOSTIC-CABLE-409-1-OBD2-II-LEAD-VAG-COM-/330399696070?pt=UK_Diagnostic_Tools_Equipment&hash=item4ced5b44c6

Hi there are two connectors, I have a dash out on a gal at mo as changing a heater so will take photo of wires and where they go tomorrow. Had the same problem on a mondeo the elements have gone will need to replace the screen!!! Sorry to interupt the topic on this post but how difficult is it to remove the dash cyborg as I need to replace the heater matrix on my 2000 tdi galaxy .Thanks.