sam

I no you can get it separate it comes straight of the air box. If that is correct.

That is very helpful hope I can get a chance to look tonight.

how do i find that 01237 - Fuel Cut-off Valve - N109; mechanical malfunction?

I have done that it still says the same?

Hi have a r reg galaxy 1.9tdi the other day it reved up when I started it and it is like driving with no turbo, I already had vag com so I have tested it and it came up with this. I don't no what it means could any one help please? VCDS-Lite Version: Release 1.1 Friday, 01 July 2011, 20:15:32. Chassis Type: 7M - VW Sharan Scan: 25,01,02,03,08,09,15,16,17,18,19,22,29,36,37,39,45,46,55,56,76 ------------------------------------------------------------------------------- Address 25: Immobilizer Labels: 7M0-953-257.LBL Controller: 7M0 953 257 K Component: V31 VA1 98V BA 3 3 Coding: 09600 Shop #: WSC 00000 VCID: 3E0FBDFB2979 1 Fault Found: 01176 - Key 65-10 - Unauthorized - Intermittent ------------------------------------------------------------------------------- Address 01: Engine Labels: 028-906-021-AHU.LBL Controller: 028 906 021 HC Component: 1,9l R4 EDC 00SG 1905 Coding: 00002 Shop #: WSC 00020 VCID: 57C1085FA603 4 Faults Found: 65535 - Internal Control Module Memory Error 35-10 - - - Intermittent 01237 - Shareware Version. To Decode all DTCs 04-00 - Please Register/Activate 00553 - Shareware Version. To Decode all DTCs 31-10 - Please Register/Activate - Intermittent 00527 - Intake Manifold Temperature Sensor (G72) 30-00 - Open or Short to Plus Readiness: N/A ------------------------------------------------------------------------------- Address 09: Cent. Elect. Labels: None Controller: 7M0 962 258 Component: Multifunkt.Einheit 0001 Coding: 00005 Shop #: WSC 00020 VCID: F49BDFD3D7B5 No fault code found.

[quote name='chrispb123456' pretty sure it is engine oil took it off today and it had black oil in it. there is not a very tight fit on the vacuum this is towards the right hand side of the engine, then the pipe goes round the back towards the turbo and then into the master cylinder. I have just found a split where it splits of to the turbo, and I have taped it up for now but the pipe still falls of the vacuum so I have also taped that on. would u suggest I need new pipes and also the vacuum. I presume the seals have gone for there to be oil in there.

HI I wanted to know if there should be engine oil going into my brake vacuum, on my galaxy 1998 diesel. also the pipe that comes from the vacuum keeps coming off whilst driving what could this be?