herbie

VR6 one fault remains 00533 - Idle Speed Regulation 14-00 - Adaptation Limit (Add) Exceeded Any ideas?

Just an update- Purchased a MAF sensor from my local VW dealer for

Thanks for the reply. Can the maf sensor be tested?

Can any one help with the fault codes below Saturday, 12 March 2005, 11:12:13 VAG-COM Version: Release 409.1-US Control Module Part Number: 021 906 256 P Component and/or Version: MOTRONIC M3.8.1 HS V03 Software Coding: 00000 Work Shop Code: WSC 00020 2 Faults Found: 00553 - Mass Air Flow Sensor (G70) 28-00 - Short to B+ 00533 - Idle Speed Regulation 14-00 - Adaptation Limit (Add) Exceeded

Just an update on my problem. I found one plug the a burnt electrode,when i replaced this the car as far as i can tell now runs OK :ph34r: . I am currently trying to figure out what caused this. If anyone has any ideas feel free to comment.

vr6- I have sprayed water around the leads and coil pak, this didn`t cause any light shows. Any more suggestions would be appreciated. I have ordered a lead from skpang so i should be able to use vag-com shortly.

i used the correct tool. How do i check the leads and coil pack? Thanks for the reply

I have a problem with my V6 Gal,at idle the engine is lumpy pulls ok through the gears until 4th&5th at about 40mph then it feels like it`s missing exagerated if the throttle is depressed more. The car has done 75000, i changed the plugs at 60000, has anyone any ideas?