pegasus

Hello again,I used vag tacho, and as you said not to user friendly but changing the mileage was fine, however I tryed to input a key, the softwear gave me the option of a 4 didgit code but vag tacho gave me a 5 didgit pin code 65535, so that dose not fit. I am making a presumption that to alter any of the softwear settings you read the eeprom, make changes in the buffer memory and then press re-write memory, sounds easy :) but I would need to know which address line to alter and which didgets. So then I tryed vag-com 409.1 from ebay a hole

Hi Mirez, well thats a great explanation many thanks, I will now buy myself a copy of vagtacho, I will let you know how I get on

Hi Mirez, thanks for you help, my cluster computor dose not work the car had been burnt out when I got it so I have replaced the interior but the cluster is original, it has corssion on the board which I cleand off but its never been 100%, when you remove the key the door ajar light fashes, I think also down to the corossion, ok list below are the cluster codes on stickers original cluster VW-Nr 7M5 920 900G Ford-Nr YM21 10849 ARD Replacment 2.3 cluster VW-Nr 7M5 920 920F Ford-Nr YM21 10849 AJB Replacment 2.8 cluster VW-Nr 7M5 920 920M Ford-Nr YM21 10849 BDD I take it that the last didgets and letter on the vw code indicates softwear type, the same for the ford number, I have never tryed using any of these programs before,so my line of thought is as I said earlyer replace softwear or is the eeprom any thing to do with softwear types? the speedo is around 10 to 20 mph out. which leads do I require for vagcom and vagtaco, I would also like to set the milage to the same as my original cluster 34,000 miles any help will be greatly appreciated

Hello All, my 2030 2.3 galaxy needs a new instrument cluster, so being quite tight I bought a second hand one (well 2 actuly)the problem is that one of the flashes oil warning and the speedo is out(this was of a 2.8) and the other the taco and tem gauge dont work this one is out of a compatible vehicel (but when pluged in to a snap on diagnostic they work in test mode, I take it its a softwear incompatibility problem. so the question is what do I do next, can I reprogram the cluster with the correct softwear?? can I read the eprom of the origanal cluster and input this to the replacment cluster?, is it vagcom softwear that I need? Guys your help will be appreciated.

Thanks George, that info has been very helpfull Neil Hi all, well the cars almost done now and I can confirm that all glass dose fit including the complete sun roof assembley Many thanks for your help

Thanks George, that info has been very helpfull Neil

Hello all, this is my first post on the forum,I have just bought a 03 2.3 giha with fire damge and I need to replace the interior and some glass namley two n/s door windows, windscreen and the sun roof, so the question is, are they the same as the Mk1 because I have one that I am breaking and I have found a Mk1 with a sunroof in my local scrap yard your help will be greatly appreciated :)