Stephen154

That's a very handy site - thanks. They have the same Goodyear at

If the unit is like the old fiesta's 57 reg or such like then yes.

What type of tow bar do you have or are you thinking of getting? What caravan are you/ or do you have?

What does the unit look like?

Firstly start with the trim around gearstick, quite easy to pull up. This should show two torx screws by ashtray. next you need to remove trim at top the piece that runs the length of the dash, use a plastic trim remove or a piece of strong plastic to help remove trim start at the steering wheel end and lift gently, once removed i taped to dash with masking tape to hold it out of position this way i didnt need to remove any connectors. This should show the top two torx screws. remove all of these, and place the removed part over the gear stick out of the way. Next there are 4 torx screws to remove from the old unit and 2 clips either side to unclip. Once you have done this the unit is out. There is one more clip to remove the units harness from the back of it and removed the aerial. The new unit has a canbus connector and such like that need to be put in the new unit first just plug in connectors, then i just connected the harness to the new unit using old clips and refit the aerial. And refitted using the reverse insturctions. Hope this helps.

Hopefully this has worked.

I have just brought an after market headunit from China like the ones you see on ebay. Well it arrived yesterday and i decided to fit it. Didnt want all the aux features just the ipod ,gps,dvd, so took the galaxy apart and fitted the unit straight swap only hard part was fitting the ipod lead to go into glovebox and finding somewhere for the gps reciever. Done in an hour. Very impressed steering wheel controls work a treat cd fine dvd fine gps fine ipod fine only problem is mw radio not so clever but want do you want for

No, it won't. I bought one off ebay last year, which was advertised as 'fits Mk3 Galaxy and S-max'. When I got it I realised that it was for an S-max, because it wasn't long enough and the fixing/locating brackets were completely different. I returned it and got my money back, however, with a suggestion to the seller that the cover was for S-max only. :P Neil Thanks for the information.

Any pictures of the finished job? Was it hard to do? How did you fit it with the over haed lockers in place.

I was just wondering if a smax parcel shelf would fit?