toneinblack

this bloke on ebay is selling them pre cut if u want to fit them yourself ? BIN @

I got to agree mo4 that really does look rough for 75 quid :lol: , for a start that broken casing over the coiling could cause problems, try to get a refund if possible .

I know this sounds silly and am being serious for the moment , you are using proper shop bought cd's and not home made copies or mp3's burnt to cd by computer are you ? ( although my cd player ( ford ) plays home burnt discs but not mp3 discs.

noticed you said it once she went lol , your in big trouble when she reads this in the morning :)

Do halfords still do them exchange? also a good auto electricians should be able to fix your one for less esp if you have it out of the car already .

theres one on ebay now if its any good for you http://cgi.ebay.co.uk/FORD-GALAXY-1-9TD-AL...1QQcmdZViewItem

theres no feed back on the fix so i wonder if you got it right lol :huh:

Tried this and the frame is tight on the floor so cant slide the covers off :) i know ive done it before when i had to sort out the optional extra indoor swimming pool lol ,

Wont that stop the water from flowing round the cooling system if its full of cardboard? :huh:

I remember putting petrol into an old car of mine ages ago and the pump nozzle just fell off into my tank , Would love to take the mick out of few comments on here but ive done a few silly things so its best i keep quiet lol :lol:

Hi all, Has anybody got any idea how you lift the front seat and frame up off the floor high enough to get in the under floor pockets? I know i used to get in them with no problem but even with pulling both side levers on front seats ( and the seats do rise ) the frames are still on the floor so i cant lift the lids . Any ideas? thanks in advance chaps :lol:

Hi mate, any chance of pics and prices? thanks.

Hi mate, I had this problem ( along with loads of other members here ) The answer for me was to jack the front of the car up then remove the plastic lining from under the wing, then on the bulkhead you will see some oblong plastic grills , these pop out ,,, pop them off, ( one on each side ) and remove any crap from the inside of the holes ,, open bonnet and with watering can , pour water on windscreen and watch if it now comes out of the holes, if it does , replace plastic wheel linings ( dont replace plastic grill ) hopefully problem solved ,

My ghia has the special tool but its the 2 pronged version ( u shaped piece of coathanger type wire ) and on my ghia wheels it has a small grove that i just slide the tool in and lever it off , I must have earlier ghia wheels as i dont have any allen key type slots on it.

Would it be worth leaving the drain plug out and getting a few mates to push the car down the street and over some bumps in the hope that it falls out?

http://cgi.ebay.co.uk/S-1025-2x-8-XGA-TFT-...1QQcmdZViewItem http://i11.ebayimg.com/04/i/05/13/43/d8_2.JPG Hi all, I was just asked by the wife what i would like for xmas , so i looked on ebay and found these , Does anybody have these ? and what are they like and are they easy to fit ? Also would a dvd /ps2 be easy to wire in so work independently? They seem good at

Ive bled them and the fluid looked ok but the brakes still feel spongey , Will run it tomorrow and see if they bed in , R ound 2 tomorrow lol and thank you for all your help ;)

the pads wernt badly grooved but worn around the edge , do you have to bleed the brakes with the engine running or turned off?

Hi all, after finally replacing my front brake pads ( undone the cap of brake resevoir , couldnt undo the bleed valves ) replaced both sides of the brake pads , put it all back together and now have a spongey brake pedal, ( pedal sinking quite far ) would bleeding cure it or have i done something i shouldnt have? lol thanks all

jeeeeez, Ive managed to spot the yellow screw top by peering through the pipes and other bits and pieces under the scuttle panel and with some luck , I squeezed my rather fat hand in and managed to unscrew the cap, why did they make it so awkward to reach ? thanks for help all :-)

Hi all, need to undo the top on my my brake fluid resevoir but cant find ( get to it ) it, Its the 2.8 v6 and isnt covered in the haynes manual, and am guessing its to the left and rear of engine bay but i just have a plastic box with a few pipes coming off it , any ideas? thanks all.

my parents had a problem like this and bought a new battery , only for it to keep going flat on them , anyway they got the rac out to jump start them and the rac man done all the checks and he found an interior light was left on all the time and they hadnt noticed , might be worth checking the interior lights ( glove box, door bottoms, rear luggage space etc ) are all switching off .

Thanks for the replies , just got in from work, there has been a grinding noise for the last couple of days , hopefully it isnt discs as well as pads but will have a good look when i do it tomorrrow , ( fingers crossed ) tone.

Hi all, Just started to get the grinding noise coming from front brakes when using brakes and will dig out the haynes manual and replace the front pads but will i run into any problems or are they pretty straight forward? ( i did use the search box but it seems down atm) thanks all, :D

thanks for the reply rallim , and please let me know if it works like that :)