paolone

While the cable arrives, can you say me please where is located the connector on the Galaxy 2.3 ghia 1998? thank Paolo

I have find this one: http://cgi.ebay.it/ws/eBayISAPI.dll?ViewIt...e=STRK:MEWAX:IT is the right one? Thanks in advance Sparky Paolo

Thanks Sparky, But you in the 4

Thanks for all i'll try to buy it. some other name of software that i can buy to have a complete vision of my car (galaxy 2.3 ghia petrol 1998)instead of the freeware software that the cable includes? Bye Paolo

VAG-COM will only communicate with the SRS airbag system. For everything else, including the engine, you need a EOBD/OBDII type interface. I use a generic ELM327 based cable and the ScanTool software... works with most non-VAG vehicles from 2001 onwards. Pre-2001 vehicles may not be fully OBDII compliant, and some functions may not be available. It works on my 1999 model, I would think it should on yours too - however, as there were some major changes to the electrical systems for 99-on models, I cannot be 100% certain. If anything will work, it's an OBDII interface. Thanks, Where i can find the ScanTool Software (which is the correct name) and where i can buy the OBDII cable? Have you some links on internet (site, ebay)? Paolo

Hy, Which kind of cable and of software i have to find, please? thanks Paolo

Hy I have a Ford Galaxy 2.3 ghia 1998. I would like to buy a usb cable and a software to chek my galaxy, (i have read the posts on the forum) but i don't know wich i have tu download from Ross-Tech, the 409.1 or 311.2? or any other software that allows to check and adjust my car. And wich usb cable to buy, because in ebay all the vag-com usb cable are for audi-wv-seat and don't show ford galaxy or seat alhambra or wv sharan. Please help me, Thank in advance Paolo

Hy someone that has a TIF can show me where is the central unit or how i can check using a tester if the switch on the pedal works? tHANKS pAOLO

Thanks, but how can i know if they are faulty? i have a tester but i don't know how to check it. can you explain me please? Paolo

Hy, I have a Ford Galaxy 2.3 ghia. 1 month ago my cruise control starts to go only in the first 10 minutes of a trip, then it stopped to go. I read all your post on this forum and i have changed all the vaacum pipes by myself, i have check the vaacum pump and it goes if i connect to a 12v battery i have connect an electrical cable from the normal cable of the vaacum pipe to the internal of the car and i connect it to the vaacum pump. and when i swich on the cruise control the pump doesn't go. So I can say that is an electrical problem for my cruise control, Can youi help me, and suggest me what i have to check? the electrical cable that connect the vaacum pump, where it starts? where is the central unit of the cruise control? which is the fuse or the transistor that i have to check? Thanks in advance Paolo

noone can help me please?

ok, pump goes and suck air (with the finger on the hole i can feel the suck, but not a great suck...) i have change the vacuum tube, but the cruise contron doesn't go... What i have to check or i have to do? Thanks Paolo

Thanks, now i will do it Paolo

What kind of explanation?????? I'm only asking how to check if the vacuum pump of my cruise control on my galaxy 1998 2.3 ghia is working or not???? I have put off the vacuum pump and there is 3 pin for the alimentation, if i have to check if it works, which one i have to connect to the positive and to the negative of a 12v battery? If there was only 2 pin i haven't thid dubt. But only has seen a vacuum pump can give me the answer... howether the vacuum pump is like this: http://img138.imageshack.us/my.php?image=webdscf34262pu.jpg Thanks Paolo

Hy nobody can help me please? Paolo

Hy Who can explain me which is the positive and the negative cable in the vacuum pump of the cruise control? and what is the third cable? if i want to proove it out of the car to know if it run or not whic cable i have to connect to the + and - of a 12v battery? thanks in advance if you can post some photo please. Paolo

Cool In Italy I haven't seen before thi kind of race... But you drive one of it or you have done only the photo? Paolo

Hy I have to change the vacuum pipe in the cruise control in my galaxy 2,3 petrol 1998, because since 2 days ago it doesn't work. the pipe in the vacuup pump was break, i cut the final of it but the cruise control don't goes, so i want to change all the pipe from the pump to the pedal, but i don't know how to... some one have some photo to show the process expecially to acces to the pedal... thanks in advance Paolo

Hallo My name is Paolo and I own a Galaxy 2,3 petrol 1998 Bye Paolo