Fuse For Aux Heater

[raymac]

before anyone shoots me down about search engine :D i have looked and found one post stating that fuse number 12 is the fuse for aux heater,checked and is fine can anyone varify that is the correct fuse and if it is then i know i need to look elsewhere to find the problem,cheers :rolleyes:

[AndeeeH]

'TIS said that fuse 12 is the one for the Aux Heater. You could also look at the invert relay for the aux heater which is the second from the left on the second row up in the Central Junction Box. :rolleyes: Andy.

[raymac]

'TIS said that fuse 12 is the one for the Aux Heater. You could also look at the invert relay for the aux heater which is the second from the left on the second row up in the Central Junction Box. :blink: Andy.

 

Thanks mate i'll check that tomorrow :lol:

[raymac]

'TIS said that fuse 12 is the one for the Aux Heater. You could also look at the invert relay for the aux heater which is the second from the left on the second row up in the Central Junction Box. :lol: Andy.

 

Thanks mate i'll check that tomorrow :16:

 

Went out to look at relay @ 03.00am (workstime :blink: ) started the gal up and after about 5 secs gave it a good quick rev and hey presto we are taxiing on the public runway once more :o so looks like i'm going to get cooked again on the way home :o

[nhawan]

'TIS said that fuse 12 is the one for the Aux Heater. You could also look at the invert relay for the aux heater which is the second from the left on the second row up in the Central Junction Box. :angry2: Andy.

 

Thanks mate i'll check that tomorrow :angry2:

 

Went out to look at relay @ 03.00am (workstime :angry2: ) started the gal up and after about 5 secs gave it a good quick rev and hey presto we are taxiing on the public runway once more :angry: so looks like i'm going to get cooked again on the way home :angry2:

 

Did you replace the relay with a new one or just take it out and put it back in again?

I have similar problem on my 2001 MK2 Galaxy Tdi.

The heater does not come on at all and vagcom reports an 'implausible signal' error. Testing the outputs through vagcom gives not results at all..no clicks from the metering pump whatsoever.

 

Any ideas?