How To Remove A 2nd Generation Sony Stereo...

[randall977]

This is a basic photo guide on how to remove a 2nd generation Sony head unit and in my case install a Nokia CK100 bluetooth hands free kit. I used a SOT092S adapter so the Nokia ISO cable would fit to the cars Quadlock connection.

 

Step one - carefully prise the wood trim from the dash using a hard plastic tool.

 

 

Step two - carefully prise the lower trim away.

 

 

Step three - remove the torx screws and remove the upper trim to reaveal the head unit torx screws.

 

 

Step four - fit CK100 and loom - I fixed mine here with a zip tie.

 

 

Step five - reinstall everything.

Edited October 18, 2010 by randall977

[Phillyphatass]

Thank you very much. This saved me hours of head-scratching.

[angelippo]

This is a basic photo guide on how to remove a 2nd generation Sony head unit and in my case install a Nokia CK100 bluetooth hands free kit. I used a SOT092S adapter so the Nokia ISO cable would fit to the cars Quadlock connection.

 

Step one - carefully prise the wood trim from the dash using a hard plastic tool.

 

 

Step two - carefully prise the lower trim away.

 

 

Step three - remove the torx screws and remove the upper trim to reaveal the head unit torx screws.

 

 

Step four - fit CK100 and loom - I fixed mine here with a zip tie.

 

 

Step five - reinstall everything.

 

 

Can you please post again the pictures? looks not available from Flickr.

 

Thanks

[gregers]

doubtful,he was last here jan 11.:unsure:

[Stephen154]

Angelippo check this link it explains the process very simple to do.

Sat nav